Superior’s RazerTail Truck Unloader directly transfers material from truck to stockpile, removing extra handling to guarantee product quality. The RazerTail Truck Unloader can reduce your unload times to as little as 60 seconds per truck load. While conventional truck unloaders can require days to install, these portable units take just minutes to be production ready. Our patented self-cleaning ramps ensure any extra material is fed to the hopper after a truck’s exit, limiting maintenance. The RazerTail Truck Unloader is often paired with our Telestacker® Conveyor to create a seamless material transfer process.
Onboard Truck Ramps
The RazerTail Truck Unloader is available with modular steel ramps that eliminate the need to build earthen ramps, saving time and money. When you use a traditional truck unloader it takes nearly a ten-hour day, and more than 1,000 cubic yards of material to build the earth ramp. The RazerTail Truck Unloader’s ramp system extends 7 feet 3 inches on each side with folding pin-connection system, allowing easy access for low-clearance trucks and approximately 85% faster setup and teardown times.
The RazerTail Truck Unloader drastically reduces unload times. With that speed, it’s important that the unloader is engineered to minimize or eliminate spillage problems. Our engineers tackled this issue by designing patented self-cleaning, hinged hopper ramps that hydraulically rise to a vertical position to dump any spilled material onto the conveyor. Compared to the competition, our higher sidewall design does a better job of containing the load, reducing spillage and saving cleanup time.
|Discharge Height||STPH||Material Size||Cycle Time (Min)|
|48″||6′ 11″||1,000||4″ Minus||2.5 – 3|
|48″ Adjustable Height||11′ – 5″||1,000||4″ Minus||2.5 – 3|
|72″ Adjustable Height||12′ – 8″||1,500||4″ Minus||2.5 – 3|
|72″ Haul Truck||12′ – 7″||2,000||8″ Minus||2.5 – 3|