Aggredry™ Washer

Home/Lavagem/Parafusos de lavagem/Aggredry™ Washer
Aggredry™ Washer 2017-04-21T17:29:10+00:00
  • Can process up to 550 tons per hour.
  • Superior’s Aggredry Dewatering Washer is a single machine integrating a fine material washer and a dewatering screen.
  • The material, producing instantly salable material with a moisture content as low as 8%.
  • Aggredry™ Washer, a machine that combines a washing screw and dewatering screen
  • We have a diverse and broad washing product lineup

The patented Aggredry Washer is a combination of a fine material washer and a dewatering screen in a single machine. Sand specs are becoming more precise, making washing aggregate more necessary than ever. Unfortunately, incorporating processes like washing and dewatering into your job sites can create some common inconveniences. Processing wet material means you often need additional time for it to dry. That extra time means delaying the reclamation of the stockpile. Also, extra real estate is needed for the drying inventory. The Aggredry Washer solves the problem by both washing and drying the material, producing instantly salable material with a moisture content as low as 8%.

Resulting in a moisture content as low as 8% when the material hits the stockpile.

Instantly Salable Sand

The Aggredry Washer’s screw removes clay, dirt, and crusher dust from your sand. This dusty water is washed out the backside while the salable aggregate is carried and discharged to the integrated dewatering screen. Here, any remaining water is separated, resulting in a moisture content as low as 8% when the material hits the stockpile. From there, there’s no need to wait. Give your loader operator a quick thumbs up to transfer the fresh material directly to the delivery equipment.

This process saves 3% of the material from being rerouted to the waste pond.

Fines Recovery System

All too often, the material fines generated as a result of wet processing can’t be used. The fines can become an aggravating waste product that goes right down the drain. To solve this issue, minus quarter millimeter sand is collected below the Aggredry Washer’s screen in an underfloom and is reintroduced back into the sand screw via a water jet. This process saves 3% of the material from being rerouted to the waste pond, which gives you more product to sell.

How Much Profit Will 3% Earn You?

Single Screw

Screw Size TPH RPM Max Material Size Auger Shaft Motor Vibrating Motor
36″ 100 20 3/8″ 15 HP 14 HP
48″ 200 16 3/8″ 25 HP 15 HP
60″ 300 13 3/8″ 30 HP 17.2 HP

 

Twin Screw

Screw Size TPH RPM Max Material Size Auger Shaft Motor Vibrating Motor
48″ 400 16 3/8″ 25 HP each 17.2 HP each
60″ 800 16 3/8″ 30 HP each 17.2 HP each

Related Products

A multipurpose machine that washes, classifies, and dewaters aggregate material.
Our Dewatering Screen helps you achieve moisture content
Superior Industries