Exclusively offered from Superior, the Trailblazer Conveyor is a 500 foot pre-assembled portable groundline conveyor. The Trailblazer Conveyor transports from site to site in one 84 foot towable load. Setup has been known to take as little as one hour with a small crew. Cleanup costs and power cable management are drastically reduced by only having a single transfer point associated with numerous jump conveyors. If you want to simplify your on-site management and cut unnecessary costs, the Trailblazer Conveyor is a viable option that may fit your project’s needs.
Hour Long Setup
Compared to a traditional, stationary groundline conveyor which would require days or even weeks for setup and teardown, the Trailblazer Conveyor system allows rapid deployment from the road to working status in about an hour. With a gravity-style take-up built into the trailer structure, the Trailblazer Conveyor simply folds in or out in an accordion fashion from its chassis with a small crew required to position the supports. The transport straps and pull-pins ensure that each conveyor system comes off the chassis in order, one at a time, as it is guided carefully onto supports.
The Trailblazer Conveyor allows you to eliminate multiple transfer points that each have a cleanup point and a greasing point. Having one feed point and one discharge point gives your operators less areas that they need to monitor. This helps you save on time and maintenance costs. You also save on energy costs by having only one conveyor drive, reducing power consumption by up to 85%. We want to help you lower your operating costs. The Trailblazer Conveyor can radically improve the efficiency of your project by eliminating the need to erect a permanent or stationary groundline conveyor.
Knife River takes advantage of portable solution — a new, first-of-its-kind portable groundline conveyor. The Trailblazer Conveyor is a highly unique innovation that includes 500-feet of fully-belted and assembled groundline conveyor in a mobile, one-load, towable package. Read the full story.
|Kingpin to Ground Height (Transport)||4′ – 1″||4′ – 1″||4′ – 1″|
|Head Pulley to Kingpin (Transport)||6′ – 1″||5′ – 9″||5′ – 9″|
|Kingpin to Axle (Transport)||60′ – 0″||60′ – 6″||63′ – 4″|
|Kingpin to Tail (Transport)||83′ – 3″||86′ – 7″||89′ – 5″|
|Ground to Head Pulley Height (Operation)||12′ – 6″||12′ – 6″||12′ – 6″|