In Stock: 48" x 150' Mine Duty TeleStacker® Conveyor

Serial Number 329496 MD TS
Price ($USD) Call us at +1 (320) 589-2406
Model F48150TSFD – NEW
Description 48″ x 150′ Mine Duty TeleStacker Conveyor
Model Year 2012
Location Prescott Valley, Arizona, USA
Click Here for Pictures

Horizontal Line

Conveyor Frame

Horizontal Line

Truss Design Heavy-duty, designed for maximum strength/weight ratio
Main Conveyor 100′ long with 84″ deep truss
Stinger Conveyor 80′ long with 66″ deep truss
Extension Conveyor extends to 150′ long with hydraulic cable winch
Safety Stop Mechanically stops retraction in the event of cable failure

Horizontal Line

Drive Specifications

Horizontal Line

Drive Class II head end
Gear Reducers Shaft mount
Backstops Installed in reducers
Motors (2) 40/(2) 40 HP 1800 RPM TEFC
V-Belt Drive With drive guard
Capacity 1500 MTPH of 120 PCF gold ore material
Surcharge 25-degree (3/8″ minus) 18-degree incline
Belt Speed 450/600 fpm
Drive Pulleys 20″ dia, 3/8″ herringbone lagged, Superior MD drum
Tail Pulleys 16″ dia, Superior MD Chevron® Wing Pulley
Grease Lines To common grease bank
Auto Greaser Not included
Shafts Turned and polished
Bearings Sealmaster – Browning
Take-Ups Screw type

Horizontal Line

Portability

Horizontal Line

Undercarriage FB® Undercarriage, Hydraulic raise cylinders, pumping unit, covers
Mud Flaps Patented FD axle assembly with tracks
Transport Axles (8) OTR tires
Tag Axle Not included
Axle Jacks Not applicable
Radial Axle Hydraulically powered by radial tracks
Fifth Wheel Not applicable
Anchor Pivot Designed in Horizontal Index Conveyor (HIC)
Brakes Not applicable
Lights Not applicable
Mud Flaps Not applicable
Landing Gear Not applicable
Towing Eye Adjustable for pit transport

Horizontal Line

Components

Horizontal Line

Belting 3-ply 1/4 x 1/16 330 PIW
Belt Splice Factory vulcanized
Primary Scrapers ASGCO Super-Skalper™ Belt Cleaner on main and stinger
Secondary Scrapers ASGCO Razor-Back™ MDX and Martin SQC2S™ Cleaner
Idlers Superior, CEMA D, 5″ dia, Sealed for life ball bearings
Load Area (Main) Superior 20-dgree impact troughing idlers, 16″ spacing
Trough 35-degree (3.5′ main spacing/4′ stinger spacing)
Returns Steel cans, 8′ spacing
Self-Aligning Steel troughing aligner on main; Navigator® Return Trainer on stinger
Radial Hopper Rock box style, 1/2″ AR400 liner
Gathering Trough 6′ long with adjustable rubber flashing

Horizontal Line

Controls

Horizontal Line

Control System Manual button control power travel, conveyor raise, stinger extension
Cable Carrier Cover Protect carrier from fugitive material
Material Flow Switch No included, requires PiloPro Automation
Wireless Remote Operates hydraulic functions from up to 1,000′
Zero Speed Sensor Stinger conveyor only
Belt Alignment Detects belt misalignment
E-Stop Installed on both sides
Lights Installed at head and tail; Photo cell on/off
Horn Signals start up of conveyor
Beacon Flashes when belt misalignment is detected
Voltage 480v/3ph/60hz
Electrical Enclosure with main disconnect, circular breaker and starters with on/off button to control each electric motor

Horizontal Line

Additional

Horizontal Line

Startup Optional onsite training
Guarding Drive/tail pulleys, v-belt drive and return idlers
Ground Pressure 40 PSI
Owners Manual Operations and maintenance manual included

Horizontal Line

Contact Sales Department

Horizontal Line

back to top ↑
© Superior Industries, Inc. 2013
Superior graphics, logos, designs, page headers, button icons and other service names are the trademarks of Superior Industries, Inc.
Superior Industries, Inc. is an Equal Opportunity Employer.